Weld Mount Executive Adhesive & Fastener Kit w /AT-8040 Adhesive [1001003]

Description

Executive Adhesive & Fastener Kit w/AT-8040 Adhesive

This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastic Or Rubber. AT-8040 Will Hold Even Our Heaviest Parts on a Vertical or Overhead Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225°. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.

The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc.

The AT-1001003 Kit Contains:

• (1) AT-8040 – No Slide Multi Bonder Acrylic Adhesive
• (1) AT-300 – Dispensing Gun
• (10) AT-850 – 3.5″ Mixing Tips For AT-8040 Adhesive
• (100) AT-5 – Large White Cable Tie Mount
• (50) AT-3 – Small White Cable Tie Mount
• (4) AT-113 – Large Footman’s Strap
• (10) PS62-832-16SS – 1.00″ Long Panel Stud
• (4) ST125-1420-16SS – 1.00″ Long Stud With 1/4 x 20 Threads 1.25″ Base
• (4) ST125-1420-24SS – 1.50″ Long Stud With 1/4 x 20 Threads 1.25″ Base
• (4) ST125-1024-12SS – .75″ Long Stud With 10 x 24 Threads 1.25″ Base
• (4) ST125-1024-24SS – 1.50″ Long Stud With 10 x 24 Threads 1.25″ Base
• (1) Plano Storage Box 14″ x 9″ x 2.75″
• Step By Step Instructions

Quick Guide (pdf)
Owner’s Manual (pdf)