Description

Pry-Out Deck Plates

Beckson developed the first pry-out deck plate.These plates were designed with an extra heavy O-ring to assure a water tight fit.Plates are provided with non-skid or smooth surfaces for different installation requirements.The original was used to access the handle for Beckson’s permanently mounted pump.The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris.Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present.

O.D.: 8-1/2″
Hole Cut: 6-1/2″
Passage: 6-3/16″
Center: Dimple