Description
Product
These spacers are machined flat on both sides and constructed of a durable aluminum alloy. Adding these spacers is a simple approach to get a few more miles per hour. These spacers connect the transom to the engine mounting bracket or the jack plate to the engine. By using set-back spacers on the transom, you can move the hull’s center of gravity further. This Spacer Engineered Marine Products – EMP Engineered Marine Products (11-02502) re-balances the boat, allowing the hull to maintain its current attitude while requiring less trim. As a result, pushing the boat forward rather than holding the bow up requires more effort. Key Features:
- The spacers were for a specific reason.
- The purpose of the spacers is to improve performance and durability.
- Only the aftermarket replacement part will fit the spacers.
- Front fork spacers are designed for propellers.
Specifications:
- SKU: 11-02502
- UPC: 840080441788
- Weight: 0.01 LBS
- Alternate Products SKU: “323942”, “11-02502”
- Manufacturer Part Number (MPN): 11-02502
This product replaces:
- 859890, 840080441788
![Attwood 316 Stainless Steel Alloy Flush Mount Fuel Vent - 90 Vent [66032-3]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/attwood-316-stainless-steel-alloy-flush-mount-fuel-vent-90-vent-66032-3.webp)
![SchmittOngaro Ongaro Wheel – 15.5″ f/3/4″ Teleflex Tapered Shaft [50002]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/schmittongaro-ongaro-wheel-15-5-f-3-4-teleflex-tapered-shaft-50002.webp)
![Seaview 1-1/4″ Black Light Bar f/20″ or Smaller Satdomes – Folds Over 90 – Must Pick LTB Top [LTBSBLK]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/seaview-1-1-4-black-light-bar-f-20-or-smaller-satdomes-folds-over-90-must-pick-l.webp)