Description
117WR-4 Transducer Housing Wrench
A single-handed wrench that holds the main thru-hull housing via the ‘wrench flats’ on the side of the housing to facilitate tightening of the hull nut. For 2″ bronze and stainless steel housings (P617V, B617V, SS617V).
Use wrench 117WR-2 or 117WR-3 for the hull nut.
*Note that this wrench will not fit on the CA500 camera housing.
![Garmin 4-Pin 10' Transducer Extension Cable f /echo Series [010-11617-10]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/garmin-4-pin-10-transducer-extension-cable-f-echo-series-010-11617-10.webp)
![Garmin Step Mount f /DownVu & SideVu Transducer [010-12106-00]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/garmin-step-mount-f-downvu-sidevu-transducer-010-12106-00.webp)
![Garmin Transducer Adapter f/echo Female 4-Pin to Male 6-Pin [010-11615-00]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/garmin-transducer-adapter-f-echo-female-4-pin-to-male-6-pin-010-11615-00.webp)
![Garmin Transom Mount f/Panoptix LVS32 [010-12784-02]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/garmin-transom-mount-f-panoptix-lvs32-010-12784-02.webp)
![Garmin Trolling Motor Adapter Kit [010-11957-00]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/garmin-trolling-motor-adapter-kit-010-11957-00.webp)
