Description
.75″ Tall Stainless Stud w/8 x 32 Thread
Our Small Stainless Steel Panel Studs have a wide range of uses.Originally they were used for mounting on the backside of dash panels for mounting to the console.Now they are used for securing a wide range of wire clamps and other small components to composite surfaces.The base plate is 0.62″ in diameter with a .75″ tall stud.Tensile strength is 300 lbs. and shear strength is 375 lbs.Maximum torque load is 45 inch/lbs.
![Ancor 120V Two Setting Heat Gun [703023]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/ancor-120v-two-setting-heat-gun-703023.webp)
![Ancor Single Crimp Ratchet Tool f /22-8 AWG Heatshrink, Vinyl & Nylon Insulated Terminals & Connectors [703010]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/ancor-single-crimp-ratchet-tool-f-22-8-awg-heatshrink-vinyl-nylon-insulated-term.webp)
![Weld Mount No Slide Metal /Composite Bonder [8040]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/weld-mount-no-slide-metal-composite-bonder-8040.webp)
![Weld Mount No Slide Metal /Composite Bonder *Case of 10* [804010]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/weld-mount-no-slide-metal-composite-bonder-case-10-804010.webp)
![Weld Mount AT-300 Adhesive Dispensing Gun f /AT-2010 & AT-4020 [80300]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/weld-mount-at-300-adhesive-dispensing-gun-f-at-2010-at-4020-80300.webp)
![Ancor Cut/Strip/Crimp Multi Tool - 22-10 AWG [702007]](https://www.bestmarinebattery.com/wp-content/uploads/2026/08/ancor-cut-strip-crimp-multi-tool-22-10-awg-702007.webp)
